Home . Export . Lincoln Electric Products . Engine Driven Welders . Lincoln Vantage 500 (Perkins) Ready-Pak Diesel Welder No. K2728-3 Call for Quote
Lincoln®
Engine Driven Welders
Lincoln Vantage 500 (Perkins) Ready-Pak Diesel Welder No. K2728-3 Call for Quote
Lincoln® Vantage® 500 (Perkins®) Ready-Pak Diesel Welder No. K2728-3 Compact Design!
Compact Case
−One of the most compact 500 amp machines available. Suitable for many pickup and service trucks. Stainless Steel Enclosure
−Standard stainless steel roof, side panels and engine-access door deliver added protection and durability. Multi-Process Welding, Separate Arc Gouge Mode
−Select one of five Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start&#reg; DC TIG, CV-Wire or new Arc Gouging mode which maximizes output with up to 3/8" carbon rods. VRD™ Voltage Reduction Device™
−Reduced OCV in the CC-Stick weld mode for added safety.
Plenty of AC Generator Power
−22 kW peak (20 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
−13 kW peak (12 kW continuous) 1-phase AC generator power for common construction tools. Sealed GFCI Modules
−GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation. Reliable Engine
−4 cylinder 1850 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
−More HP for output at high altitude than a naturally-aspirated engine. Innovative Service Access
−Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
−Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
−Patented tilt down control panel for easy servicing of internal components.
−Patented radiator cap cover is latched for easy access and is lockable. Unit Includes
Vantage® 500 (Perkins®), Trailer with Duo-Hitch™ (K2636-1), Fender and Light Kit (K2639-1), Cable Rack (K2640-1), Electrode Holder (K909-8), Electrode Cables - 110 ft total (2 - K2485-3, 1 - K2483-3), Work Clamp (K910-2), Work Cable - 50 ft (K2484-3) and Cable Connectors (2 - K2487-1). Shipped fully assembled.
http://www.pmwelding.comk2728-3.html
$21,100.00
Engine Driven Welders
Lincoln Vantage 500 (Perkins) Ready-Pak Diesel Welder No. K2728-3 Call for Quote
Lincoln® Vantage® 500 (Perkins®) Ready-Pak Diesel Welder No. K2728-3 Compact Design!
Get a 500 amp welder in a compact case! The same size as the Vantage® 300 and 400! A turbo-charged diesel engine with Lincoln®’s Chopper Technology® makes this a reality! Also, less weight than traditional 500 amp welders makes the Vantage® 500 compact design a great choice for installation on truck beds where available space and weight capacity are limited.
All the features that have been standard on Vantage® products are here: stainless steel enclosure, multi-process welding, plenty of AC generator power (single and 3-phase). The compact Vantage® 500 also includes a fifth weld mode for maximum arc gouging output, VRD™ (Voltage Reduction Device™), innovative service access and sealed GFCI (Ground Fault Circuit Interrupter) modules – sealed from moisture for more reliable operation! The Vantage® 500 compact design is a great choice for construction and rental fleets. It’s ready for tough duty!
Advantage Lincoln−One of the most compact 500 amp machines available. Suitable for many pickup and service trucks.
−Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
−Select one of five Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start&#reg; DC TIG, CV-Wire or new Arc Gouging mode which maximizes output with up to 3/8" carbon rods.
−22 kW peak (20 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
−13 kW peak (12 kW continuous) 1-phase AC generator power for common construction tools.
−GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation.
−4 cylinder 1850 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
−More HP for output at high altitude than a naturally-aspirated engine.
−Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
−Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
−Patented tilt down control panel for easy servicing of internal components.
−Patented radiator cap cover is latched for easy access and is lockable. Unit Includes
Vantage® 500 (Perkins®), Trailer with Duo-Hitch™ (K2636-1), Fender and Light Kit (K2639-1), Cable Rack (K2640-1), Electrode Holder (K909-8), Electrode Cables - 110 ft total (2 - K2485-3, 1 - K2483-3), Work Clamp (K910-2), Work Cable - 50 ft (K2484-3) and Cable Connectors (2 - K2487-1). Shipped fully assembled.
http://www.pmwelding.comk2728-3.html
$21,100.00
Zip Code: Province: 
Country:
Description
Specifications
Accessories and Options
Lincoln® Vantage® 500 (Perkins®) Ready-Pak Diesel Welder No. K2728-3
Compact Design!
Compact Case
−One of the most compact 500 amp machines available. Suitable for many pickup and service trucks.
Stainless Steel Enclosure
−Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
Multi-Process Welding, Separate Arc Gouge Mode
−Select one of five Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start&#reg; DC TIG, CV-Wire or new Arc Gouging mode which maximizes output with up to 3/8" carbon rods.
VRD™ Voltage Reduction Device™
−Reduced OCV in the CC-Stick weld mode for added safety.
Plenty of AC Generator Power
−22 kW peak (20 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
−13 kW peak (12 kW continuous) 1-phase AC generator power for common construction tools.
Sealed GFCI Modules
−GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation.
Reliable Engine
−4 cylinder 1850 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
−More HP for output at high altitude than a naturally-aspirated engine.
Innovative Service Access
−Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
−Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
−Patented tilt down control panel for easy servicing of internal components.
−Patented radiator cap cover is latched for easy access and is lockable.
Unit Includes
Vantage® 500 (Perkins®), Trailer with Duo-Hitch™ (K2636-1), Fender and Light Kit (K2639-1), Cable Rack (K2640-1), Electrode Holder (K909-8), Electrode Cables - 110 ft total (2 - K2485-3, 1 - K2483-3), Work Clamp (K910-2), Work Cable - 50 ft (K2484-3) and Cable Connectors (2 - K2487-1). Shipped fully assembled.
Get a 500 amp welder in a compact case! The same size as the Vantage® 300 and 400! A turbo-charged diesel engine with Lincoln®’s Chopper Technology® makes this a reality! Also, less weight than traditional 500 amp welders makes the Vantage® 500 compact design a great choice for installation on truck beds where available space and weight capacity are limited.
All the features that have been standard on Vantage® products are here: stainless steel enclosure, multi-process welding, plenty of AC generator power (single and 3-phase). The compact Vantage® 500 also includes a fifth weld mode for maximum arc gouging output, VRD™ (Voltage Reduction Device™), innovative service access and sealed GFCI (Ground Fault Circuit Interrupter) modules – sealed from moisture for more reliable operation! The Vantage® 500 compact design is a great choice for construction and rental fleets. It’s ready for tough duty!
Advantage Lincoln−One of the most compact 500 amp machines available. Suitable for many pickup and service trucks.
−Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
−Select one of five Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start&#reg; DC TIG, CV-Wire or new Arc Gouging mode which maximizes output with up to 3/8" carbon rods.
−22 kW peak (20 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
−13 kW peak (12 kW continuous) 1-phase AC generator power for common construction tools.
−GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation.
−4 cylinder 1850 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
−More HP for output at high altitude than a naturally-aspirated engine.
−Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
−Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
−Patented tilt down control panel for easy servicing of internal components.
−Patented radiator cap cover is latched for easy access and is lockable.
Unit Includes
Vantage® 500 (Perkins®), Trailer with Duo-Hitch™ (K2636-1), Fender and Light Kit (K2639-1), Cable Rack (K2640-1), Electrode Holder (K909-8), Electrode Cables - 110 ft total (2 - K2485-3, 1 - K2483-3), Work Clamp (K910-2), Work Cable - 50 ft (K2484-3) and Cable Connectors (2 - K2487-1). Shipped fully assembled.
| Welding Specifications | |
| Welding Output Range | 30-525 amps DC |
| 40-300 amps Pipe | |
| 20-250 amps DC TIG | |
| 14-40V CV | |
| Rated CV DC Output/Volts/Duty Cycle | 500A/40/100% |
| 525A/38/60% | |
| Engine Specifications | |
| Type of Engine | Perkins 404D-22T Turbo EPA Tier 4i |
| Cylinders | 4 |
| HP & Speed (rpm) | 43@1850 |
| Fuel Type | Diesel |
| Generator Output | 3-PH: 22 kW peak - 1-PH 13 kW |
| 3-PH 20kW Cont. - 1-PH 12 kW | |
| Physical specifications | |
| Weight | 480 lbs. (218 kgs) |
| Dimensions (in) H x W x D | 36.2 x 21.5 x 42.3 |
| Dimensions (mm) H x W x D | 920 x 546 x 1073 |
 | ||
Regular Price: $14.64 Our Low Price: $13.07 | | Regular Price: $32.88 Our Low Price: $29.68 |
- Lincoln Outback 185 Engine Driven Welder No.K2706-2
- Lincoln® Outback®145 Engine-Driven Welder with Kohler Engine No.K2707-2
- Bulldog™ 5500 Engine-Driven Welder w/ Kohler® Engine No. K2708-2
- Lincoln Ranger 250 GXT AC/DC Welder (w/Electic Fuel Pump) No. K2382-4
- Lincoln Ranger® 225 Engine Driven Welder (Kohler) Price shown after $200 Manufacturer Rebate No. K2857-1
- Lincoln Ranger 250 GXT AC/DC Welder (w/Mech Fuel Pump, Stainless Steel Case Side) No. K2382-5
- Lincoln Ranger 305 G DC Welder (Kohler) No. K1726-5 Free Shipping!
- Lincoln Vantage 500 (Perkins) Diesel Welder No. K2686-1 - Call for Quote
- Lincoln Vantage 500 (Perkins) Ready-Pak Diesel Welder No. K2728-3 Call for Quote
Copyright © 2012 pmWelding.com All rights reserved.
Yahoo! Store by Solid Cactus.
Yahoo! Store by Solid Cactus.
