Build-UP and Hardfacing Electrodes and Wires
Group 1: Build-Up and Joining Alloys
Build-Up of Carbon Steel
Applications: Machinery parts–wearing parts of carbon and low-alloy steel subject to metal-tometal rolling, sliding and impact loading. Examples are shafts, gears and other heat-treated and machined surfaces. Also used to renew worn steel parts to near original dimension prior to hard surfacing.
| Coated Electrodes & Bare Rods | Open-Arc and Gas-Shielded Wires | Submerge Arc Wires |
| Build-Up LH | Stoody Build-Up | Stoody 104 |
| Build-Up AP-G | ||
| Thermaclad 104 |
Applications: Machinery subject to high impact from rock or ore as occurs on impact crushers, shovel lips and teeth; heavy metal-to-metal pounding as occurs on railroad frogs and crossings. Also for rebuilding manganese steel parts to near original dimensions prior to hardfacing.
| Coated Electrodes & Bare Rods | Open-Arc and Gas-Shielded Wires | Submerge Arc Wires |
| Dynamang | Dynanmang | |
| Nicromang | Nicromang | |
| Nicromang Plus | Nicromang Plus | |
| Faundry CO-Mang | Foundry CO-Mang | |
| Trackweare | Trackware |
Build-Up and Joining of Both Carbon and Manganese Steel
| Coated Electrodes & Bare Rods | Open-Arc and Gas-Shielded Wires | Submerge Arc Wires |
| Stoody 2110 | Stoody 110 | |
| Stoody 111 | ||
| Stoody 120 | ||
| Versalloy Plus | Versalloy GP-0 | |
Joining and Build-Up of Cast Irons
| Coated Electrodes & Bare Rods | Open-Arc and Gas-Shielded Wires | Submerge Arc Wires |
| Castweld 55 | Castweld Ni55-O/S | Castweld Ni55-O/S |
| Castweld 56 | Castweld Ni30-O/S | Castweld Ni55-S |
| Castweld 57 | Castweld Ni30-G | Castweld Ni30-G |
| Castweld 99 | Castweld 99-G/S | Castweld Ni99-G/S |
Group 2: Metal To Metal Wear
Applications: Non-lubricated metal-to-metal rolling or sliding parts where temperature can be a factor such as steel mill rolls and undercarriage parts of earth moving equipment.
| Coated Electrodes & Bare Rods | Open-Arc and Gas-Shielded Wires | Submerge Arc Wires |
| Super Build-UP | Sttody 107 | |
| Sttody 105B | ||
| Stoody 1105 | Stoody 105-G | |
| Stoody 4552 | ||
| Stoody 420 | 420-S | |
| Thermaclad 104TJ | ||
| Stoody 1102 | Stoody 102 | Stoody 102 |
| Rail End 932 | Rail End 932-0 | Thermaclad 42 |
| M7-G | ||
| Stoody 964AP-G | ||
| Stoody 964-G | ||
| Stoody 966-G | ||
Group 3: Metal to Earth for Moderate to Severe Impact & Moderate to Severe Abrasion (high alloy-iron based)
Applications: Surfaces subject to abrasion from bulk handling of rock, ore, clay, sand, etc., such as digger teeth, crushing surfaces, grizzlies, mullers, conveyor screws, etc.
Copyright © 2012 pmWelding.com All rights reserved.
Yahoo! Store by Solid Cactus.
Yahoo! Store by Solid Cactus.
